- buckling safety
- buckling safety STAT Knicksicherheit f
English-German dictionary of Architecture and Construction. 2013.
buckling safety
Schlagen Sie auch in anderen Wörterbüchern nach:
Buckling — In engineering, buckling is a failure mode characterized by a sudden failure of a structural member subjected to high compressive stresses, where the actual compressive stress at the point of failure is less than the ultimate compressive stresses … Wikipedia
Geometric and material buckling — In a nuclear reactor, criticality is achieved when the rate of neutron production is equal to the rate of neutron losses, including both neutron absorption and neutron leakage. Geometric buckling is a measure of neutron leakage, while material… … Wikipedia
Aircraft safety card — An aircraft safety card is a document instructing passengers on an aircraft about the procedures for dealing with various emergency conditions that might arise during the flight.The safety cards are usually provided by airlines on all commercial… … Wikipedia
Structural engineering — is a field of engineering dealing with the analysis and design of structures that support or resist loads. Structural engineering is usually considered a speciality within civil engineering, but it can also be studied in its own right. [cite… … Wikipedia
Cold formed steel — (CFS) is the common term for products made by rolling or pressing thin gauges of sheet steel into goods. Cold formed steel goods are created by the working of sheet steel using stamping, rolling, or presses to deform the sheet into a usable… … Wikipedia
Collapse of the World Trade Center — Coordinates: 40°42′41.12″N 74°00′44.00″W / … Wikipedia
building construction — Techniques and industry involved in the assembly and erection of structures. Early humans built primarily for shelter, using simple methods. Building materials came from the land, and fabrication was dictated by the limits of the materials and… … Universalium
solids, mechanics of — ▪ physics Introduction science concerned with the stressing (stress), deformation (deformation and flow), and failure of solid materials and structures. What, then, is a solid? Any material, fluid or solid, can support normal forces.… … Universalium
Truss — For other uses, see Truss (disambiguation). In architecture and structural engineering, a truss is a structure comprising one or more triangular units constructed with straight members whose ends are connected at joints referred to as nodes.… … Wikipedia
Strength of materials — Internal force lines are denser near the hole, a common stress concentration In materials science, the strength of a material is its ability to withstand an applied stress without failure. The applied stress may be tensile, compressive, or shear … Wikipedia
RMS Titanic — was an Olympic class passenger liner owned by the White Star Line and built at the Harland and Wolff shipyard in Belfast, Ireland (now Northern Ireland). On the night of 14 April 1912, during her maiden voyage, Titanic hit an iceberg, and sank… … Wikipedia
